Comments on: Edelbrock or Holley carb for stock 350 Chevy?

By: miiiikeee

miiiikeee — Sun, 10 Jan 2010 22:03:25 +0000

q.jet built correctly is great for the street.

By: mikey

mikey — Sat, 09 Jan 2010 09:00:05 +0000

For a single four barrel in street/strip use – go with the quadrajet.

By: chevyraceman_383

chevyraceman_383 — Wed, 06 Jan 2010 06:06:18 +0000

Edelbrock 600 cfm. Best bet for put on and forget street carb.

Not bad for street/strip cars eaither. I run one on my camaro down to 11.40′s @118

By: CHEV24EVER

CHEV24EVER — Mon, 04 Jan 2010 20:41:21 +0000

easy answer egr valve yes no ? stock 350, carbs ,edel,holly, egr yes no? gm manif. edel. perf. egr. yes no? don”t use egr with or without. motor will ping and blow!!!!!!!

By: chevorlet2@att.net

chevorlet2@att.net — Sun, 03 Jan 2010 14:20:42 +0000

Holley for the strip/edelbrock for the street.

By: timgussler

timgussler — Fri, 01 Jan 2010 21:22:52 +0000

go with a 450-650 holley on your stock motor

By: dodge man

dodge man — Wed, 30 Dec 2009 08:00:10 +0000

i think you,d like the way the edelbrock,and the way it kicks in a lot better and they stay tuned a whole lot better than a holley does,i own an edelbrock and i haven’t touched the adjustment screws on it in months ,before that i had holley on it and i had to reset it every other day,and this is on a chevy s-10 with 350 in it,and the edelbrock to me is more economical as long as im not getting in it,good luck,and happy new years,

By: Ford Man 89

Ford Man 89 — Wed, 30 Dec 2009 04:13:37 +0000

holley is better whe have two cab trucks an we have a holley carbs on them.. we have had a few edelbrock carbs but we aint had the best of luck with them to say the least

By: Adam G

Adam G — Mon, 28 Dec 2009 03:27:08 +0000

How do you have a GM and Edelbrock part at the same time? Intake=manifold…

Anyway, it depends what you’re looking for. Holleys are good, but overrated and overpriced. Many Edelbrocks are rebadged Webers, which in my opinion are a superior product. Quadrajets are severely underrated, very affordable and can give great performance and driveability. I’m a big fan of using multiple two barrel carbs, and Rochesters are a dime a dozen, stone reliable, and can give you a lot of tuning options not available elsewhere.

By: Pancakes

Pancakes — Thu, 24 Dec 2009 15:39:18 +0000

A matter of taste. IMHO, edlebrocks work better on top of edelbrock intakes. Holleys MAY work a little better on stock manifolds.